The original repository has been deleted or made private. This page is an archival snapshot from indexing time; the install command may no longer work.

@yang208691-source/dsh-nutstore-backup avatar

@yang208691-source/dsh-nutstore-backup

en: 'Backs up DeepSeek Harness sessions, plugin config and workspace memory to Nutstore (Jianguoyun) over WebDAV, with incremental upload, connection test and one-click restore on a new machine.' zh: '把 DeepSeek Harness 的会话记录、插件配置与工作区记忆通过 WebDAV 增量备份到坚果云,支持连接测试与在新机器上一键恢复。'

PluginStorageKnowledgeStorageFileMemory
Verification
L5 · Run tested
Verified
Risk
Out of scope
Health
Active
Trust
Silver

Install verification: runtime verified (L5) · tested on dsh 0.2.2-rc.1 · last checked Install verification details →

Install verification badge dsh 0.2.2-rc.1Install verification badge dsh 0.2.1-rc.5Install verification badge dsh 0.2.1-rc.3Install verification badge dsh 0.2.1-rc.2Install verification badge dsh 0.2.0-rc.2

Data as of (UTC)

What it doesAI

Backs up DeepSeek Harness sessions, plugin config and workspace memory to Nutstore over WebDAV with incremental upload and one-click restore.

  • Incremental WebDAV upload to Nutstore (Jianguoyun)
  • Backs up sessions, plugin config and workspace memory
  • Connection test and one-click restore on a new machine
storageAIfileAI

Capability tags are AI-inferred or rule-extracted from the README (see badge) — vocabulary-limited, not install-verified. AI = inferred; README = literal keyword from the readme.

Installation

dsh plugin --profile web add github:yang208691-source/dsh-nutstore-backup#v0.2.0
verified v0.2.0

Install method: GitHub · runtime verified (L5) · verified on dsh 0.2.2-rc.1

Trends

Four lines, four questions: total stars, stars gained this week, cumulative downloads, downloads this week. The GitHub pair comes from real-read sampling — a rotating daily shard, so one plugin is re-read roughly every 5–14 days, sparser than npm; the npm pair has a value on every snapshot day. The two cumulative panels are smoothed curves with no sample markers; the two weekly panels keep their raw bars and add a 4-week moving-average trend line that strips single-week noise down to the direction of travel.

GitHub stars
2★

current (registry 2026-11-10) · 5 samples (roughly every 7 days); a smoothed curve through every sample — not a daily series

10-12 → 11-09 · 5 points

Weekly star gain
+0★

Bars = the delta between two samples 5–14 days apart (negative points down, faint bars contain reconstructed points); line = 4-week moving-average trend

10-19 → 11-09 · 4 points

Cumulative downloads
—

Reconstructed backwards from the current total using daily downloads (gaps are not interpolated)

Only 0 points (< 3): no chart yet

no data yet

Weekly downloads
—

Bars = the snapshot’s last-week rolling window (official npm + npmmirror combined); line = 4-week moving-average trend — the shape of weekly demand, not a user count

Only 0 points (< 3): no chart yet

no data yet

weekly board —total board —downloads ≠ unique usersstar weekly —

Verification & Compatibility

Grouped by plugin version: each card lists the dsh versions actually tested against that artifact version and their install verdicts (L5 wins). Untested combinations are omitted — absence means untested, never assumed compatible. L1–L3 are a plugin-level static archive (independent of the dsh version — the same verdict on every dsh row): they sit in each row's level grid next to L4/L5, marked "static", while their evidence is stored once per plugin inside that row's "checks & evidence" instead of being duplicated per version.

External credentials (plugin-level): none detected

Declared DSH compatibilityfrom package.json · peerDependencies
author declared no dsh version requirement

○ The author declares no dsh version requirement — install is not blocked by version.

Install compatibility matrix (rows = plugin versions〔latest 5〕, columns = dsh versions〔latest 5〕)
At-a-glance → evidence in the cards below
plugin \ dshdsh 0.2.2-rc.1dsh 0.2.1-rc.5dsh 0.2.1-rc.3dsh 0.2.1-rc.2dsh 0.2.1-alpha.2
v0.2.0✓✓✓✓·
v0.1.1····✓
v0.1.0·····
Install compatibility (by plugin version, dsh versions within)
Legend:✓ L5 runtime verified○ ecosystem plugin◼ ecosystem app✗ failed
v0.2.0github✓ 4 runtime-verified2026-11-14

https://github.com/yang208691-source/dsh-nutstore-backup

✓dsh 0.2.2-rc.12026-11-06L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.2-rc.1
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.2.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.2-rc.1

ID: dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.1 · profile: l4-sandbox

Issued: 2026-11-06 · expires: 2026-11-13

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-06
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 6.1s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-06
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 6.1s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-06
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 6.1s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-06
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · install mode reused L4 scratch
check took: 31ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-11-06
ready line dsh web: http://127.0.0.1:49167/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-11-06
path / · HTTP 200 · took 31ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-11-06
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.1-rc.52026-11-01L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-rc.5
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.2.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-rc.5

ID: dsh-nutstore-backup@v0.2.0@dsh0.2.1-rc.5 · profile: l4-sandbox

Issued: 2026-11-01 · expires: 2026-11-08

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-01
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 2.0s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-01
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 2.0s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-01
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 2.0s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-11-01
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · install mode reused L4 scratch
check took: 1.5s
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-11-01
ready line dsh web: http://127.0.0.1:61758/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-11-01
path / · HTTP 200 · took 1.5s
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-11-01
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.1-rc.32026-10-27L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-rc.3
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.2.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-rc.3

ID: dsh-nutstore-backup@v0.2.0@dsh0.2.1-rc.3 · profile: l4-sandbox

Issued: 2026-10-27 · expires: 2026-11-03

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-27
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 3.4s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-27
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 3.4s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-27
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 3.4s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-27
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · install mode reused L4 scratch
check took: 18ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-27
ready line dsh web: http://127.0.0.1:52997/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-27
path / · HTTP 200 · took 18ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-27
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.1-rc.22026-10-21L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-rc.2
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.2.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-rc.2

ID: dsh-nutstore-backup@v0.2.0@dsh0.2.1-rc.2 · profile: l3-fullscan

Issued: 2026-10-21 · expires: 2026-10-28

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-20
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 1.8s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-20
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 1.8s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-20
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · channel GitHub source · outcome ran · exit 0
check took: 1.8s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-20
spec github:yang208691-source/dsh-nutstore-backup#v0.2.0 · install mode reused L4 scratch
check took: 79ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-20
ready line dsh web: http://127.0.0.1:63667/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-20
path / · HTTP 200 · took 79ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-20
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

v0.1.1github✓ 3 runtime-verified2026-10-18

https://github.com/yang208691-source/dsh-nutstore-backup

✓dsh 0.2.1-alpha.22026-10-12L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-alpha.2
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.1.1
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-alpha.2

ID: dsh-nutstore-backup@v0.1.1@dsh0.2.1-alpha.2 · profile: l4-sandbox

Issued: 2026-10-12 · expires: 2026-10-19

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-12
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 3.3s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-12
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 3.3s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-12
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 3.3s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-12
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · install mode reused L4 scratch
check took: 22ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-12
ready line dsh web: http://127.0.0.1:63493/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-12
path / · HTTP 200 · took 22ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-12
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.0-rc.22026-10-08L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.0-rc.2
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.1.1
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.0-rc.2

ID: dsh-nutstore-backup@v0.1.1@dsh0.2.0-rc.2 · profile: l4-sandbox

Issued: 2026-10-08 · expires: 2026-10-15

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-08
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 3.9s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-08
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 3.9s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-08
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 3.9s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-08
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · install mode reused L4 scratch
check took: 277ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-08
ready line dsh web: http://127.0.0.1:57046/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-08
path / · HTTP 200 · took 277ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-08
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓prehistory2026-10-04L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: unknown
  • • Plugin artifact: github · https://github.com/yang208691-source/dsh-nutstore-backup#v0.1.1
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for prehistory

ID: dsh-nutstore-backup@v0.1.1@dshunknown · profile: l3-fullscan

Issued: 2026-10-04 · expires: 2026-10-11

View checks & evidence
L1 · Found✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed

↳ carried from earlier record dsh-nutstore-backup@v0.2.0@dsh0.2.2-rc.3 (l3-fullscan)

Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-04
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 4.7s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-04
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 4.7s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-04
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · channel GitHub source · outcome ran · exit 0
check took: 4.7s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-04
spec github:yang208691-source/dsh-nutstore-backup#v0.1.1 · install mode reused L4 scratch
check took: 314ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-04
ready line dsh web: http://127.0.0.1:50701/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-04
path / · HTTP 200 · took 314ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-04
verdict active · entries 150
match: include:dsh-nutstore-backup · dsh-nutstore-backup · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

v0.1.0github2026-10-03

https://github.com/yang208691-source/dsh-nutstore-backup

No runtime install test for this version (static scan only) — compatibility unknown, never assumed.

Author badges

Embed the dsh.so badges in your README to show this plugin's automated security-scan and install-test status:

dsh.so risk badge
`[![dsh.so risk](https://cdn.dsh.so/badge/dsh-nutstore-backup.svg)](https://www.dsh.so/artifact/dsh-nutstore-backup/?ref=badge)`
dsh 0.2.2-rc.1 install verified
`[![dsh.so install · dsh 0.2.2-rc.1](https://cdn.dsh.so/badge/install/dsh-nutstore-backup@0.2.2-rc.1.svg)](https://www.dsh.so/artifact/dsh-nutstore-backup/?ref=badge-install)`
dsh 0.2.1-rc.5 install verified
`[![dsh.so install · dsh 0.2.1-rc.5](https://cdn.dsh.so/badge/install/dsh-nutstore-backup@0.2.1-rc.5.svg)](https://www.dsh.so/artifact/dsh-nutstore-backup/?ref=badge-install)`
dsh 0.2.1-rc.3 install verified
`[![dsh.so install · dsh 0.2.1-rc.3](https://cdn.dsh.so/badge/install/dsh-nutstore-backup@0.2.1-rc.3.svg)](https://www.dsh.so/artifact/dsh-nutstore-backup/?ref=badge-install)`
dsh 0.2.1-rc.2 install verified
`[![dsh.so install · dsh 0.2.1-rc.2](https://cdn.dsh.so/badge/install/dsh-nutstore-backup@0.2.1-rc.2.svg)](https://www.dsh.so/artifact/dsh-nutstore-backup/?ref=badge-install)`
dsh 0.2.0-rc.2 install verified
`[![dsh.so install · dsh 0.2.0-rc.2](https://cdn.dsh.so/badge/install/dsh-nutstore-backup@0.2.0-rc.2.svg)](https://www.dsh.so/artifact/dsh-nutstore-backup/?ref=badge-install)`

dsh.so is an independent community project, not affiliated with or endorsed by DeepSeek AI. Badges are maintained by dsh.so; embed links carry a ?ref= attribution parameter.

Security Report

Two automated layers, neither a manual review: a static scan (per-plugin rule checks) and a model-driven dynamic security audit that covers only the subset static-flagged at warn or above and never executes plugin code.

dsh-nutstore-backupAutomated review · daily

Static low; dynamic medium (authoritative when present) → overall medium.

static low→dynamic medium→overall medium
dynamic findings0 critical·0 high·1 medium·3 low
mediumoverall · medium
1static scan · vet primaryvet AST static analysis (npm artifact or git source)
plugin versionv0.2.0dsh manifest
scanned versionv0.2.0git2026-11-14
current versionv0.2.0same version
vet verdictclean · npm

Vet is an AST static scan (npm artifact or git source).

show static findings (7)
  • warningfsWrite · fileslib/config.mjs:253

    fs.writeFileSync(tmp, `${JSON.stringify(value, null, 2)}\n`, { encoding: 'utf8', mode: 0o600 })

  • warningfsWrite · fileslib/credential-store.mjs:143

    if (backup !== undefined) fs.writeFileSync(backup, previousText, { encoding: 'utf8', mode: 0o600 })

  • warningfsWrite · fileslib/credential-store.mjs:145

    fs.writeFileSync(temporary, text, { encoding: 'utf8', mode: 0o600 })

  • warningfsWrite · fileslib/credential-store.mjs:148

    fs.chmodSync(file, 0o600)

  • warningchildProcess · code-execlib/server.mjs:157

    spawn('cmd', ['/c', 'start', '', address], { stdio: 'ignore', detached: true, windowsHide: true }).unref()

  • warningnetIp · networklib/verify-page.mjs:84

    <div>监听:<span class="mono">http://127.0.0.1:${escapeHtml(String(port))}</span>(仅本机;关掉这个窗口/终端即停止)</div>

  • warningfsWrite · fileslib/webdav.mjs:452

    const sink = fs.createWriteStream(temporary, { flags: 'w' })

2model reads redacted source context · never executes plugin code
highest grademedium
merged intooverall medium
audited at2026-10-23
audited artifactgit 18597cd024a5db964154c2634f7e27e14bc6be8e
findings0 critical·0 high1 medium / 3 low hidden
show 4 audit findings
  • mediumWebDAV client accepts http:// and would send the app password as cleartext Basic authlib/webdav.mjs:29

    config.server is free-form (settings page, config.json, patch API). If it is set to an http:// URL, the constructor builds `Basic base64(account:password)` and node:http sends the Nutstore app password in cleartext over the network, where any on-path observer or proxy can read it and take over the backup account. The error message even claims https is required, so the check contradicts its own stated policy.

  • lowVerification server's --host flag lets it bind beyond loopback despite the 'loopback only' security claimlib/server.mjs:39

    The file header states '只监听回环地址 ... 绝不能暴露到局域网', and this process holds the stored Nutstore credential and can trigger uploads of sessions and workspace memory. Running `node lib/server.mjs --host 0.0.0.0` exposes the config/password/backup endpoints to the LAN. The only remaining guard is the 'local only' check said to live in lib/routes.mjs, which was not available for review.

  • lowVerification page builds its machine table with innerHTML from remote-supplied directory nameslib/verify-page.mjs

    machine.machine/createdAt come from the WebDAV listing (PROPFIND href) of the configured server, i.e. remote-controlled data (or MITM-controlled, since http:// is accepted). A crafted directory name such as `<img src=x onerror=...>` executes script in the origin of the local verification server, from which it can call the plugin's own config/backup routes. The same page uses escapeHtml for other values, so this is an inconsistency.

  • lownutstore_login passes the app password through model tool arguments into the session transcriptlib/index.mjs

    A password supplied as a tool argument enters the model context and the session jsonl, and this plugin itself backs up session files to Nutstore, so the app password can end up in the cloud backup and with the model provider. The tool description does warn about it, which limits severity, but the value is still handled as ordinary prompt data.

WebDAV client accepts plain http:// (Basic app password in cleartext), the verify server can bind beyond loopback, and its table injects remote names via innerHTML.

Rule (2026-10-28): when a dynamic conclusion exists it is authoritative (it may raise or lower the level); the static scan tier (vet primary, dsh backstop) applies only when there is none (not queued / audit failed / withdrawn). The audit never writes the exemption list (exemptions are manual only); a wrong conclusion is withdrawn by human review and the tier falls back to the static scan tier.

Disclaimer: the static scan and the dynamic security audit are both automated analysis, not a security guarantee. Always review what you install.

Activity

Last commit 2026-10-19 · activity: Active

• Repo created: 2026-10-03

• Stars: ★ 2 · Forks: 0

• Health: Active — committed within last 30 days

Source

GitHub: github.com/yang208691-source/dsh-nutstore-backup

Frequently asked questions

What is @yang208691-source/dsh-nutstore-backup?

@yang208691-source/dsh-nutstore-backup is a DeepSeek Harness (dsh) plugin listed on dsh.so — an independent community registry that indexes public source repositories and publishes automated security-scan and install-verification results for each entry.

Is dsh.so or this plugin page official?

dsh.so is an independent community registry and is not affiliated with, endorsed by, or sponsored by DeepSeek AI.

How do I install @yang208691-source/dsh-nutstore-backup?

Run dsh plugin --profile web add github:yang208691-source/dsh-nutstore-backup#v0.2.0 in a DeepSeek Harness (dsh) environment. That exact command passed a real install inside an isolated sandbox (L4) plus web smoke testing (L5).

How does the security scan relate to a manual audit?

Both layers are automated, not a manual audit. The static scan is heuristic analysis of the repository source, so it can produce false positives and miss context. The model-driven dynamic security audit only covers plugins static-flagged at warn or above, never executes plugin code, and its conclusion is authoritative when there is one (it may raise or lower the static tier); exemptions stay manual. Neither layer is an endorsement: review the repository and the permissions it asks for before installing, together with the verification level and health signals.

How fresh is the data on this page?

The data on this page is as of 2026-11-14 (UTC) — the most recent valid timestamp among the registry refresh, install verification, security scan and dynamic audit. Build time is never used as a data date.

Was this page helpful?