Install verification: sandbox install ok, web smoke failed (L5) · tested on dsh 0.2.2-rc.1 · last checked Install verification details →
Data as of (UTC)
What it doesAI
Adds personal settings to DeepSeek Harness: tunable compaction thinking mode and thresholds, llama.cpp model enrichment, and web notifications.
- Tunable companion to the official compaction engine
- Configurable thinking mode and compaction thresholds
- Enriches the Models page with llama.cpp models plus web notifications
Capability tags are AI-inferred or rule-extracted from the README (see badge) — vocabulary-limited, not install-verified. AI = inferred; README = literal keyword from the readme.
Trends
Four lines, four questions: total stars, stars gained this week, cumulative downloads, downloads this week. The GitHub pair comes from real-read sampling (a rotating daily shard); the npm pair from every snapshot.
7 samples (roughly every 7 days), 3 of them reconstructed (hollow dots); sampled points, not a daily series
10-02 → 11-05 · 7 points
Each bar = the delta between two samples 5–14 days apart; negative bars point down. Faint bars include reconstructed points
10-07 → 11-05 · 6 points
Reconstructed backwards from the current total using daily downloads (gaps are not interpolated)
09-28 → 11-09 · 40 points
The snapshot’s last-week rolling window (official npm + npmmirror combined)
09-28 → 11-11 · 41 points
Installation
dsh plugin --profile web add dsh-malko-prefsInstall method: npm · sandbox install ok, web smoke failed (L5)
Verification & Compatibility
Grouped by plugin version: each card lists the dsh versions actually tested against that artifact version and their install verdicts (L5 wins). Untested combinations are omitted — absence means untested, never assumed compatible. L1–L3 are a plugin-level static archive (independent of the dsh version — the same verdict on every dsh row): they sit in each row's level grid next to L4/L5, marked "static", while their evidence is stored once per plugin inside that row's "checks & evidence" instead of being duplicated per version.
External credentials (plugin-level): none detected
Based on 1 requirement(s) across 3 @deepseek-ai/dsh-* packages. raw ranges
>=0.1.7-rc.1 ×3
✓ Running dsh 0.2.2-rc.1 is within the declared range — install is not blocked by version.
Deciding channel: no engines.dsh declared, so every dsh* peer is checked (workspace:^ | ~ | * counts as the running version).
Whether it actually runs is a separate question → see the measured matrix below (L1–L5).
| plugin ＼ dsh | dsh 0.2.2-rc.1 current | dsh 0.2.1-rc.5 | dsh 0.2.1-rc.3 | dsh 0.2.1-rc.2 | dsh 0.2.1-alpha.4 |
|---|---|---|---|---|---|
| 0.5.0 | ✗ | ✗ | ✗ | · | · |
| 0.3.0 | · | · | · | ✗ | ✗ |
| 0.2.0 | · | · | · | · | · |
| 0.1.0 | · | · | · | · | · |
0.5.0npm3 failed2026-11-06
dsh-malko-prefs
✗dsh 0.2.2-rc.1current2026-11-06L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.2-rc.1
- • Plugin artifact: npm · dsh-malko-prefs@0.5.0
ID: dsh-malko-prefs@0.5.0@dsh0.2.2-rc.1 · profile: l4-sandbox
Issued: 2026-11-06 · expires: 2026-11-13
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
✗dsh 0.2.1-rc.52026-11-01L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.1-rc.5
- • Plugin artifact: npm · dsh-malko-prefs@0.5.0
ID: dsh-malko-prefs@0.5.0@dsh0.2.1-rc.5 · profile: l4-sandbox
Issued: 2026-11-01 · expires: 2026-11-08
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
✗dsh 0.2.1-rc.32026-10-27L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.1-rc.3
- • Plugin artifact: npm · dsh-malko-prefs@0.5.0
ID: dsh-malko-prefs@0.5.0@dsh0.2.1-rc.3 · profile: l4-sandbox
Issued: 2026-10-27 · expires: 2026-11-03
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
0.3.0npm4 failed2026-10-20
dsh-malko-prefs
✗dsh 0.2.1-rc.22026-10-20L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.1-rc.2
- • Plugin artifact: npm · dsh-malko-prefs@0.3.0
ID: dsh-malko-prefs@0.3.0@dsh0.2.1-rc.2 · profile: l4-sandbox
Issued: 2026-10-20 · expires: 2026-10-27
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
✗dsh 0.2.1-alpha.42026-10-18L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.1-alpha.4
- • Plugin artifact: npm · dsh-malko-prefs@0.3.0
ID: dsh-malko-prefs@0.3.0@dsh0.2.1-alpha.4 · profile: l4-sandbox
Issued: 2026-10-18 · expires: 2026-10-25
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
✗dsh 0.2.1-alpha.22026-10-12L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.1-alpha.2
- • Plugin artifact: npm · dsh-malko-prefs@0.3.0
ID: dsh-malko-prefs@0.3.0@dsh0.2.1-alpha.2 · profile: l4-sandbox
Issued: 2026-10-12 · expires: 2026-10-19
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
✗dsh 0.2.0-rc.22026-10-09L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.2.0-rc.2
- • Plugin artifact: npm · dsh-malko-prefs@0.3.0
ID: dsh-malko-prefs@0.3.0@dsh0.2.0-rc.2 · profile: l4-sandbox
Issued: 2026-10-09 · expires: 2026-10-16
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
0.2.0npm1 failed2026-09-30
dsh-malko-prefs
✗prehistory2026-09-30L5 · failed
- • Node.js: v24.14.0
- • DSH: unknown
- • Plugin artifact: npm · dsh-malko-prefs@0.2.0
ID: dsh-malko-prefs@0.2.0@dshunknown · profile: l3-fullscan
Issued: 2026-09-30 · expires: 2026-10-07
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
0.1.0npm1 failed2026-09-28
dsh-malko-prefs
✗dsh 0.1.7-rc.22026-09-28L5 · failed
- • Node.js: v24.14.0
- • DSH: 0.1.7-rc.2
- • Plugin artifact: npm · dsh-malko-prefs@0.1.0
ID: dsh-malko-prefs@0.1.0@dsh0.1.7-rc.2 · profile: l3-fullscan
Issued: 2026-09-28 · expires: 2026-10-05
View checks & evidence
L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.
Only the latest 3 published versions are shown; source-snapshot (commit hash) groups, unstated groups and older versions are omitted — the full archive stays in the data layer (snapshot/unstated groups appear only when a plugin has no published version).
Author badges
Embed the dsh.so badges in your README to show this plugin's automated security-scan and install-test status:
`[](https://www.dsh.so/artifact/dsh-malko-prefs/?ref=badge)`dsh.so is an independent community project, not affiliated with or endorsed by DeepSeek AI. Badges are maintained by dsh.so; embed links carry a ?ref= attribution parameter.
Security Report
Two automated layers, neither a manual review: a static scan (per-plugin rule checks) and a model-driven dynamic security audit that covers only the subset static-flagged at warn or above and never executes plugin code.
Static low; dynamic medium (authoritative when present) → overall medium.
v0.5.0dsh manifest0.5.0npm2026-11-110.5.0same versionclean · npmVet is an AST static scan (npm artifact or git source).
show static findings (2)
- criticaleval · code-exec
lib/preset-config.cjs:160return eval(expr) - criticalnewFunction · code-exec
lib/preset-config.cjs:158const evaluate = new Function('ctx', 'expr', `
show 3 audit findings
- mediummalkoModels.probe resolves any identifier-shaped env var/credential and sends it as Bearer to a caller-chosen URL
lib/index.mjs:157The probe RPC is exposed to the web client through the typert manifest (lib/typert.host.mjs) and takes both the destination (`baseURL`, only checked to be http/https) and the secret name (`apiKeyEnv`, no allowlist) from the request. Any caller that can invoke the RPC can therefore read an arbitrary credential or environment variable (AWS keys, tokens, etc., not just the llama.cpp key) and have the host process send it to an attacker-controlled endpoint, where it is logged/blinded even if CORS prevents reading the response. Requires the ability to invoke the dsh web RPC (e.g. CSRF from a page t
- loweval/new Function executes !!js expressions parsed from preset YAML at load time
lib/preset-config.cjs:158This reproduces dsh's own Loader evaluator on !!js nodes found in the installed dsh packages' `presets/<id>.patch.yml`. It is reachable at plugin load (cordis.patch.yml runs it four times), but the evaluated strings come from first-party dsh files that the dsh Loader trusts and evaluates anyway, so it does not raise privilege beyond the host's existing trust of its install directory; no attacker-controlled expression reaches it via the shipped patch.
- lowpresetId is joined into the preset file path without traversal validation
lib/preset-config.cjs:118A caller passing an id containing `../` could make the module read and `!!js`-evaluate an arbitrary `*.patch.yml` on disk (arbitrary code execution in the dsh process). Only the bundled patch (four hardcoded ids) and scripts/check.mjs call it today, so this is not reachable with untrusted input.
Preset retargeting and sound route are guarded, but the malkoModels.probe RPC can send any env/credential as a Bearer token to a caller-chosen URL.
Rule (2026-10-28): when a dynamic conclusion exists it is authoritative (it may raise or lower the level); the static scan tier (vet primary, dsh backstop) applies only when there is none (not queued / audit failed / withdrawn). The audit never writes the exemption list (exemptions are manual only); a wrong conclusion is withdrawn by human review and the tier falls back to the static scan tier.
Disclaimer: the static scan and the dynamic security audit are both automated analysis, not a security guarantee. Always review what you install.
Activity
Last commit 2026-10-19 · activity: Active
• Repo created: 2026-09-26
• Stars: ★ 1 · Forks: 0
• Health: Active — committed within last 30 days
Source
GitHub: github.com/malko/dsh-malko-prefs
Author README
View on GitHub ↗The author's original README from the repository — fetched live, unedited (the English page loads the default README).
Frequently asked questions
What is @malko/dsh-malko-prefs?
@malko/dsh-malko-prefs is a DeepSeek Harness (dsh) plugin listed on dsh.so — an independent community registry that indexes public source repositories and publishes automated security-scan and install-verification results for each entry.
Is dsh.so or this plugin page official?
dsh.so is an independent community registry and is not affiliated with, endorsed by, or sponsored by DeepSeek AI.
How do I install @malko/dsh-malko-prefs?
Run dsh plugin --profile web add dsh-malko-prefs in a DeepSeek Harness (dsh) environment. That exact command passed a real install inside an isolated sandbox (L4); the web smoke test (L5) has not passed yet.
How does the security scan relate to a manual audit?
Both layers are automated, not a manual audit. The static scan is heuristic analysis of the repository source, so it can produce false positives and miss context. The model-driven dynamic security audit only covers plugins static-flagged at warn or above, never executes plugin code, and its conclusion is authoritative when there is one (it may raise or lower the static tier); exemptions stay manual. Neither layer is an endorsement: review the repository and the permissions it asks for before installing, together with the verification level and health signals.
How fresh is the data on this page?
The data on this page is as of 2026-11-11 (UTC) — the most recent valid timestamp among the registry refresh, install verification, security scan and dynamic audit. Build time is never used as a data date.