draw2code avatar

draw2code

Human-AI collaborative prototyping for DeepSeek Harness.

PluginUI & SkinsFile
Verification
L5 · Run tested
stale
Risk
Medium
Health
Stable
Trust
Silver

Install verification: sandbox install failed (L4) · tested on dsh 0.2.1-rc.5 · last checked Install verification details →

Install verification badge dsh 0.2.1-rc.2Install verification badge dsh 0.2.0-rc.2Install verification badge dsh 0.2.0-rc.1Install verification badge dsh 0.1.7-rc.2Install verification badge dsh 0.1.5-rc.2

Showing badges for the 5 most recent dsh versions; older ones are hidden.

Data as of (UTC)

What it doesAI

Human-AI collaborative prototyping: clarify requirements, co-edit Excalidraw wireframes, generate frontend pages.

  • Structured questioning to clarify product needs
  • Live Excalidraw canvas co-editing with conflict protection
  • Generates and validates frontend pages from confirmed boards
uiAIfileAI

Capability tags are AI-inferred or rule-extracted from the README (see badge) — vocabulary-limited, not install-verified. AI = inferred; README = literal keyword from the readme.

Installation

dsh plugin --profile web add github:guchang/draw2code#v0.5.0
verified v0.5.0

Install method: GitHub · sandbox install failed (L4) · verified on dsh 0.2.1-rc.5

Trends

Four lines, four questions: total stars, stars gained this week, cumulative downloads, downloads this week. The GitHub pair comes from real-read sampling — a rotating daily shard, so one plugin is re-read roughly every 5–14 days, sparser than npm; the npm pair has a value on every snapshot day. The two cumulative panels are smoothed curves with no sample markers; the two weekly panels keep their raw bars and add a 4-week moving-average trend line that strips single-week noise down to the direction of travel.

GitHub stars
4★

8 samples (roughly every 7 days), 3 of them reconstructed (dashed runs); a smoothed curve through every sample — not a daily series

09-22 → 11-17 · 8 points

Weekly star gain
+0★

Bars = the delta between two samples 5–14 days apart (negative points down, faint bars contain reconstructed points); line = 4-week moving-average trend

10-06 → 11-17 · 6 points

Cumulative downloads
—

Reconstructed backwards from the current total using daily downloads (gaps are not interpolated)

Only 0 points (< 3): no chart yet

no data yet

Weekly downloads
—

Bars = the snapshot’s last-week rolling window (official npm + npmmirror combined); line = 4-week moving-average trend — the shape of weekly demand, not a user count

Only 0 points (< 3): no chart yet

no data yet

weekly board —total board —downloads ≠ unique usersstar weekly —

Verification & Compatibility

Grouped by plugin version: each card lists the dsh versions actually tested against that artifact version and their install verdicts (L5 wins). Untested combinations are omitted — absence means untested, never assumed compatible. L1–L3 are a plugin-level static archive (independent of the dsh version — the same verdict on every dsh row): they sit in each row's level grid next to L4/L5, marked "static", while their evidence is stored once per plugin inside that row's "checks & evidence" instead of being duplicated per version.

External credentials (plugin-level): none detected

Declared DSH compatibilityfrom package.json · peerDependencies
only dsh 0.1.0-rc.6 and up, below 0.2.0

Based on 1 requirement(s) across 7 @deepseek-ai/dsh-* packages.

raw ranges>=0.1.0-rc.6 <0.2.0-0 ×7

✗ Running dsh 0.2.2-rc.5 is outside the declared range — the official install gate rejects it (incompatible-version).

To force-install, grant an exact-version exemption: dsh plugin allow-version draw2code@0.5.0 0.2.2-rc.5 (the exemption lives in the local profile; this site does not assume one)

Deciding channel: no engines.dsh declared, so every dsh* peer is checked (workspace:^ | ~ | * counts as the running version).

Whether it actually runs is a separate question → see the measured matrix below (L1–L5).

Install compatibility matrix (rows = plugin versions〔latest 5〕, columns = dsh versions〔latest 5〕)
At-a-glance → evidence in the cards below
plugin \ dshdsh 0.2.1-rc.5dsh 0.2.1-rc.3dsh 0.2.1-rc.2dsh 0.2.1-alpha.4dsh 0.2.1-alpha.2
v0.5.0✗✗✓✓✓
v0.1.0·····
Install compatibility (by plugin version, dsh versions within)
Legend:✓ L5 runtime verified○ ecosystem plugin◼ ecosystem app✗ failed
v0.5.0github✓ 9 runtime-verified2 failed2026-11-14

https://github.com/guchang/draw2code

✗dsh 0.2.1-rc.52026-10-31L4 · failed
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-rc.5
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Failed
L5 runtime
Not tested
Sandbox install failed
L4 · failed

ID: draw2code@v0.5.0@dsh0.2.1-rc.5 · profile: l4-sandbox

Issued: 2026-10-31 · expires: 2026-11-07

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✕ Failed
Declared dsh compatibility✕ Failed
Source: registry verification · Method: declared compat check · Captured 2026-10-31
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome declared-incompatible
declared dsh compatibility excludes current dsh 0.2.1-rc.5 (declared: >=0.1.0-rc.6 <0.2.0-0 ×7) — official install gating refuses; sandbox install skipped, L4 failed; declaration taken from manifest v0.5.0 while the published artifact is vv0.5.0
L5 · Run tested– Not tested

This level was not executed in this scan.

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✗dsh 0.2.1-rc.32026-10-27L4 · failed
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-rc.3
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Failed
L5 runtime
Not tested
Sandbox install failed
L4 · failed

ID: draw2code@v0.5.0@dsh0.2.1-rc.3 · profile: l4-sandbox

Issued: 2026-10-27 · expires: 2026-11-03

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✕ Failed
Declared dsh compatibility✕ Failed
Source: registry verification · Method: declared compat check · Captured 2026-10-27
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome declared-incompatible
declared dsh compatibility excludes current dsh 0.2.1-rc.3 (declared: >=0.1.0-rc.6 <0.2.0-0 ×7) — official install gating refuses; sandbox install skipped, L4 failed; declaration taken from manifest v0.5.0 while the published artifact is vv0.5.0
L5 · Run tested– Not tested

This level was not executed in this scan.

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.1-rc.22026-10-19L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-rc.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-rc.2

ID: draw2code@v0.5.0@dsh0.2.1-rc.2 · profile: l4-sandbox

Issued: 2026-10-19 · expires: 2026-10-26

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-19
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 11.1s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-19
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 11.1s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-19
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 11.1s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-19
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 58ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-19
ready line dsh web: http://127.0.0.1:57121/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-19
path / · HTTP 200 · took 58ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-19
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.1-alpha.42026-10-17L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-alpha.4
  • • Plugin artifact: github · github:guchang/draw2code#v0.5.0#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-alpha.4

ID: draw2code@v0.5.0@dsh0.2.1-alpha.4 · profile: l5-web-smoke

Issued: 2026-10-17 · expires: 2027-01-15

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-17
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · install mode reused L4 scratch
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-17
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · install mode reused L4 scratch
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-17
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · install mode reused L4 scratch
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-17
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 1.4s
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-17
ready line dsh web: http://127.0.0.1:54967/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-17
path / · HTTP 200 · took 1.4s
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-17
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.1-alpha.22026-10-11L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.1-alpha.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.1-alpha.2

ID: draw2code@v0.5.0@dsh0.2.1-alpha.2 · profile: l4-sandbox

Issued: 2026-10-11 · expires: 2026-10-18

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-11
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 32.0s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-11
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 32.0s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-11
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 32.0s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-11
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 1.1s
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-11
ready line dsh web: http://127.0.0.1:63816/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-11
path / · HTTP 200 · took 1.1s
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-11
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.0-rc.22026-10-09L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.0-rc.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.0-rc.2

ID: draw2code@v0.5.0@dsh0.2.0-rc.2 · profile: l4-sandbox

Issued: 2026-10-09 · expires: 2026-10-16

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-09
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 22.0s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-09
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 22.0s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-09
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 22.0s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-09
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 72ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-09
ready line dsh web: http://127.0.0.1:60995/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-09
path / · HTTP 200 · took 72ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-09
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.2.0-rc.12026-09-30L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.2.0-rc.1
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.2.0-rc.1

ID: draw2code@v0.5.0@dsh0.2.0-rc.1 · profile: l4-sandbox

Issued: 2026-09-30 · expires: 2026-10-07

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-30
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 35.2s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-30
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 35.2s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-30
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 35.2s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-30
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 533ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-30
ready line dsh web: http://127.0.0.1:50291/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-30
path / · HTTP 200 · took 533ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-30
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.1.7-rc.22026-09-26L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.7-rc.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.7-rc.2

ID: draw2code@v0.5.0@dsh0.1.7-rc.2 · profile: l4-sandbox

Issued: 2026-09-26 · expires: 2026-10-03

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-26
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 19.1s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-26
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 19.1s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-26
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 19.1s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-26
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 51ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-26
ready line dsh web: http://127.0.0.1:50377/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-26
path / · HTTP 200 · took 51ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-26
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.1.6-alpha.22026-09-20L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.6-alpha.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.6-alpha.2

ID: draw2code@v0.5.0@dsh0.1.6-alpha.2 · profile: l3-fullscan

Issued: 2026-09-20 · expires: 2026-09-27

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-19
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 17.8s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-19
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 17.8s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-19
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 17.8s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-19
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 45ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-19
ready line dsh web: http://127.0.0.1:57850/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-19
path / · HTTP 200 · took 45ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-19
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.1.6-alpha.12026-09-16L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.6-alpha.1
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.6-alpha.1

ID: draw2code@v0.5.0@dsh0.1.6-alpha.1 · profile: l4-sandbox

Issued: 2026-09-16 · expires: 2026-09-23

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-16
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 16.8s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-16
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 16.8s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-16
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 16.8s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-16
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 81ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-16
ready line dsh web: http://127.0.0.1:59880/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-16
path / · HTTP 200 · took 81ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-16
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓prehistory2026-10-05L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: unknown
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.5.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for prehistory

ID: draw2code@v0.5.0@dshunknown · profile: l4-sandbox

Issued: 2026-10-05 · expires: 2026-10-12

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-05
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 35.1s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-05
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 35.1s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-05
spec github:guchang/draw2code#v0.5.0 · channel GitHub source · outcome ran · exit 0
check took: 35.1s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-10-05
spec github:guchang/draw2code#v0.5.0 · install mode reused L4 scratch
check took: 1.2s
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-10-05
ready line dsh web: http://127.0.0.1:65383/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-10-05
path / · HTTP 200 · took 1.2s
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-10-05
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

v0.1.0github✓ 4 runtime-verified2026-09-11

https://github.com/guchang/draw2code

✓dsh 0.1.5-rc.22026-09-11L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.5-rc.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.1.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.5-rc.2

ID: draw2code@v0.1.0@dsh0.1.5-rc.2 · profile: l4-sandbox

Issued: 2026-09-11 · expires: 2026-09-18

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-11
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 2.4s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-11
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 2.4s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-11
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 2.4s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-11
spec github:guchang/draw2code#v0.1.0 · install mode reused L4 scratch
check took: 102ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-11
ready line dsh web: http://127.0.0.1:60596/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-11
path / · HTTP 200 · took 102ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-11
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.1.3-alpha.22026-09-08L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.3-alpha.2
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.1.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.3-alpha.2

ID: draw2code@v0.1.0@dsh0.1.3-alpha.2 · profile: l4-sandbox

Issued: 2026-09-08 · expires: 2026-09-15

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-08
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 2.7s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-08
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 2.7s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-08
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 2.7s
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-08
spec github:guchang/draw2code#v0.1.0 · install mode reused L4 scratch
check took: 59ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-08
ready line dsh web: http://127.0.0.1:50280/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-08
path / · HTTP 200 · took 59ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-08
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.1.3-alpha.12026-09-07L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.3-alpha.1
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.1.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.3-alpha.1

ID: draw2code@v0.1.0@dsh0.1.3-alpha.1 · profile: l3-fullscan

Issued: 2026-09-07 · expires: 2026-09-14

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install executed in confined sandbox✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-06
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 1.9s
Install succeeded✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-06
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 1.9s
Installed artifact confirmed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-06
spec github:guchang/draw2code#v0.1.0 · channel GitHub source · outcome ran · exit 0
check took: 1.9s
L5 · Run tested✓ Passed

active in loader tree (151 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-06
spec github:guchang/draw2code#v0.1.0 · install mode reused L4 scratch
check took: 65ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-06
ready line dsh web: http://127.0.0.1:56621/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-06
path / · HTTP 200 · took 65ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-06
verdict active · entries 151
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 123 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

✓dsh 0.1.2-rc.12026-09-05L5 · runtime verified
Environment & artifact
  • • Node.js: v24.14.0
  • • DSH: 0.1.2-rc.1
  • • Plugin artifact: github · https://github.com/guchang/draw2code#v0.1.0
Levels (L1–L3 plugin-level static archive · L4/L5 newest real verdicts for this combination)
L1 static
Passed
L2 static
Passed
L3 static
Passed
L4 sandbox
Passed
L5 runtime
Passed
Install + runtime smoke verified in the dsh sandbox — installs and runs
L5 · runtime verified · valid for dsh 0.1.2-rc.1

ID: draw2code@v0.1.0@dsh0.1.2-rc.1 · profile: l3-fullscan

Issued: 2026-09-05 · expires: 2026-09-12

View checks & evidence
L1 · Found✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L2 · Structured✓ Passed
Defaulted from L3✓ Passed
defaulted to passed — L3 install spec passed (full-registry L3 sweep policy)
L3 · Install spec✓ Passed
Install command parsed✓ Passed
Source: registry verification · Method: install spec parse · Captured 2026-11-14
DSH version declared✓ Passed
Source: registry verification · Method: DSH version declaration · Captured 2026-11-14
L4 · Install tested✓ Passed
Install succeeded✓ Passed
L5 · Run tested✓ Passed

active in loader tree (150 entries)

Sandbox install passed✓ Passed
Source: Windows ACL sandbox · Method: sandbox install run · Captured 2026-09-04
spec github:guchang/draw2code#v0.1.0 · install mode reused L4 scratch
check took: 118ms
Web boot ready✓ Passed
Source: DSH runtime · Method: web boot · Captured 2026-09-04
ready line dsh web: http://127.0.0.1:52830/?token=…
HTTP endpoint served✓ Passed
Source: DSH runtime · Method: HTTP request · Captured 2026-09-04
path / · HTTP 200 · took 118ms
Plugin active in inventory✓ Passed
Source: DSH runtime · Method: plugin inventory query · Captured 2026-09-04
verdict active · entries 150
match: include:ui-draw2code · dsh-draw2code · phase active
phases: active 122 · null 28

L1–L3 are plugin-level static conclusions (baseline, identical across dsh versions): evidence is stored once per plugin.

Only the latest 3 published versions are shown; source-snapshot (commit hash) groups, unstated groups and older versions are omitted — the full archive stays in the data layer (snapshot/unstated groups appear only when a plugin has no published version).

Author badges

Embed the dsh.so badges in your README to show this plugin's automated security-scan and install-test status:

dsh.so risk badge
`[![dsh.so risk](https://cdn.dsh.so/badge/draw2code.svg)](https://www.dsh.so/artifact/draw2code/?ref=badge)`
dsh 0.2.1-rc.2 install verified
`[![dsh.so install · dsh 0.2.1-rc.2](https://cdn.dsh.so/badge/install/draw2code@0.2.1-rc.2.svg)](https://www.dsh.so/artifact/draw2code/?ref=badge-install)`
dsh 0.2.0-rc.2 install verified
`[![dsh.so install · dsh 0.2.0-rc.2](https://cdn.dsh.so/badge/install/draw2code@0.2.0-rc.2.svg)](https://www.dsh.so/artifact/draw2code/?ref=badge-install)`
dsh 0.2.0-rc.1 install verified
`[![dsh.so install · dsh 0.2.0-rc.1](https://cdn.dsh.so/badge/install/draw2code@0.2.0-rc.1.svg)](https://www.dsh.so/artifact/draw2code/?ref=badge-install)`
dsh 0.1.7-rc.2 install verified
`[![dsh.so install · dsh 0.1.7-rc.2](https://cdn.dsh.so/badge/install/draw2code@0.1.7-rc.2.svg)](https://www.dsh.so/artifact/draw2code/?ref=badge-install)`
dsh 0.1.5-rc.2 install verified
`[![dsh.so install · dsh 0.1.5-rc.2](https://cdn.dsh.so/badge/install/draw2code@0.1.5-rc.2.svg)](https://www.dsh.so/artifact/draw2code/?ref=badge-install)`

dsh.so is an independent community project, not affiliated with or endorsed by DeepSeek AI. Badges are maintained by dsh.so; embed links carry a ?ref= attribution parameter.

Security Report

Two automated layers, neither a manual review: a static scan (per-plugin rule checks) and a model-driven dynamic security audit that covers only the subset static-flagged at warn or above and never executes plugin code.

draw2codeAutomated review · daily

Static low; dynamic medium (authoritative when present) → overall medium.

static low→dynamic medium→overall medium
dynamic findings0 critical·0 high·1 medium·1 low
mediumoverall · medium
1static scan · vet primaryvet AST static analysis (npm artifact or git source)
plugin versionv0.5.0dsh manifest
scanned versionv0.5.0git2026-11-19
current versionv0.5.0same version
vet verdictclean · git

Vet is an AST static scan (npm artifact or git source).

show static findings (5)
  • warningchildProcess · code-execsrc/daemon-client.ts:79

    const child = spawn(process.execPath, [this.daemonEntry], {

  • warningshellExec · shellsrc/daemon-client.ts:164

    execFile(launcher.command, launcher.args, (error) => resolve(error === null))

  • warningnetIp · networksrc/daemon-client.ts:18

    const response = await fetch(`http://127.0.0.1:${descriptor.port}/health`, {

  • warningnetIp · networksrc/daemon-client.ts:106

    const response = await fetch(`http://127.0.0.1:${descriptor.port}/rpc`, {

  • warningnetIp · networksrc/daemon-client.ts:116

    const response = await fetch(`http://127.0.0.1:${descriptor.port}/register`, {

2model reads redacted source context · never executes plugin code
highest grademedium
merged intooverall medium
audited at2026-10-19
audited artifactgit cc76fb57c5e41edc727c6e5dce6d07f43daa82ca
findings0 critical·0 high1 medium / 1 low hidden
show 2 audit findings
  • mediumDaemon descriptor is trusted from a shared /tmp path before the runtime directory is securedsrc/daemon-client.ts:69

    The descriptor is read from <tmpdir>/draw2code-<uid>/daemon.json and trusted (health check only requires the nonce copied from that file) before mkdir(mode 0o700) runs, and mkdir does not fix permissions of a pre-existing directory. On a multi-user host where /tmp is world-writable, a local attacker can pre-create that directory with a daemon.json pointing at a port/token/nonce they control plus a /health endpoint echoing the nonce; ensure() then returns that descriptor, so every RPC payload, scene write body, workspace path and bearer token is delivered to the attacker, and attacker-controlle

  • lowRequest-supplied workspace root is registered with the daemon without workspace-registry validationsrc/daemon-adapter.ts:91

    rootFrom() copies the raw `root` query/body value, and dshContext() only uses ctx.workspaceRegistry to fill workspaceRoot (falling back to ''), yet the unvalidated raw root is what gets registered with the daemon (and appended to the proxied URL). A loopback same-origin caller (any local process; cross-site browser requests are largely blocked by the Sec-Fetch-Site/Host/Origin checks and cannot read the responses) can therefore widen the daemon's registered roots beyond the DSH workspaces and potentially reach draw2code scene files under arbitrary directories, depending on daemon-side enforcem

Local daemon descriptor is trusted from a shared tmp path before that directory is secured, letting a local attacker impersonate the daemon; the loopback proxy itself is well gated.

Rule (2026-10-28): when a dynamic conclusion exists it is authoritative (it may raise or lower the level); the static scan tier (vet primary, dsh backstop) applies only when there is none (not queued / audit failed / withdrawn). The audit never writes the exemption list (exemptions are manual only); a wrong conclusion is withdrawn by human review and the tier falls back to the static scan tier.

Disclaimer: the static scan and the dynamic security audit are both automated analysis, not a security guarantee. Always review what you install.

Activity

Last commit 2026-09-07 · activity: Stable

• Repo created: 2026-08-18

• Stars: ★ 4 · Forks: 0

• Health: Stable — committed within 90 days

Source

GitHub: github.com/guchang/draw2code

Frequently asked questions

What is draw2code?

draw2code is a DeepSeek Harness (dsh) plugin listed on dsh.so — an independent community registry that indexes public source repositories and publishes automated security-scan and install-verification results for each entry.

Is dsh.so or this plugin page official?

dsh.so is an independent community registry and is not affiliated with, endorsed by, or sponsored by DeepSeek AI.

How do I install draw2code?

Run dsh plugin --profile web add github:guchang/draw2code#v0.5.0 in a DeepSeek Harness (dsh) environment. The command is parsed from the plugin manifest and its install spec is verified (L3); runtime sandbox install testing may not have run yet.

How does the security scan relate to a manual audit?

Both layers are automated, not a manual audit. The static scan is heuristic analysis of the repository source, so it can produce false positives and miss context. The model-driven dynamic security audit only covers plugins static-flagged at warn or above, never executes plugin code, and its conclusion is authoritative when there is one (it may raise or lower the static tier); exemptions stay manual. Neither layer is an endorsement: review the repository and the permissions it asks for before installing, together with the verification level and health signals.

How fresh is the data on this page?

The data on this page is as of 2026-11-19 (UTC) — the most recent valid timestamp among the registry refresh, install verification, security scan and dynamic audit. Build time is never used as a data date.

Was this page helpful?